Skip to product information
1 of 4

Seafrogs

VPS-100 Pre-Dive vacuum leak check system

Regular price $107.00 USD
Regular price Sale price $107.00 USD
Sale Sold out

Shipping rates and destinations

Despite the global situation associated with Covid-19, we are still able to ship to most countries by the expedited and economy methods of shipping. We constantly monitor the situation with new available destinations and shipping rates updates. Please check the list of countries below for shipping availability.

EXPEDITED SHIPPING

COUNTRY PRICE ETA
European Union countries
Austria 19.00€ 1 - 4 Working Days
Belgium 19.00€ 1 - 4 Working Days
Bulgaria 19.00€ 1 - 4 Working Days
Croatia 19.00€ 1 - 4 Working Days
Republic of Cyprus 19.00€ 1 - 4 Working Days
Czech Republic 19.00€ 1 - 4 Working Days
Denmark 19.00€ 1 - 4 Working Days
Estonia 19.00€ 1 - 4 Working Days
Finland 19.00€ 1 - 4 Working Days
France 19.00€ 1 - 4 Working Days
Germany 19.00€ 1 - 4 Working Days
Greece 19.00€ 1 - 4 Working Days
Hungary 19.00€ 1 - 4 Working Days
Ireland 19.00€ 1 - 4 Working Days
Italy 19.00€ 1 - 4 Working Days
Latvia 19.00€ 1 - 4 Working Days
Lithuania 19.00€ 1 - 4 Working Days
Luxembourg 19.00€ 1 - 4 Working Days
Malta 19.00€ 1 - 4 Working Days
Netherlands 19.00€ 1 - 4 Working Days
Poland 19.00€ 1 - 4 Working Days
Portugal 19.00€ 1 - 4 Working Days
Romania 19.00€ 1 - 4 Working Days
Slovakia 19.00€ 1 - 4 Working Days
Slovenia 19.00€ 1 - 4 Working Days
Spain 19.00€ 1 - 4 Working Days
United Kingdom 19.00€ 2 - 5 Working Days
Latin America
Brazil 29.00€ 3 - 6 Working Days
Costa Rica 29.00€ 3 - 6 Working Days
Dominican Republic 29.00€ 3 - 6 Working Days
French Guiana 29.00€ 3 - 6 Working Days
Uruguay 29.00€ 3 - 6 Working Days
Ecuador 29.00€ 3 - 6 Working Days
Chile 29.00€ 3 - 6 Working Days
Colombia 29.00€ 3 - 6 Working Days
Panama 29.00€ 3 - 6 Working Days
Puerto Rico 29.00€ 3 - 6 Working Days
South Africa 29.00€ 3 - 6 Working Days
Egypt 29.00€ 3 - 6 Working Days
Qatar 29.00€ 3 - 6 Working Days
Morocco 29.00€ 3 - 6 Working Days
Sri Lanka 29.00€ 3 - 6 Working Days
Northern Mariana Islands 40.00€ 4 - 8 Working Days
Guam 45.00€ 4 - 8 Working Days
Israel 29.00€ 3 - 6 Working Days

WARNING  - THIS ACCESSORY IS NOT MEANT TO BE USED UNDERWATER AS PER MANUFACTURER INSTRUCTIONS! ANY ATTEMPT TO DO SO CAN CAUSE EQUIPMENT LOSS AND NOT COVERED BY THE WARRANTY!

Compatible models of underwater camera housings:

 

Included

  • Electronic valve
  • Pump
  • Screwdriver (for battery replacement)

 

The vacuum pump system is used for checking the water tightness of underwater camera housing before submerging.

 

Install the camera inside underwater camera housing in a dry and low humidity level place.

15-30 minutes before your dive remove the lid from the backplate to access the vacuum pump system opening (Illustration 1) and make sure the O-ring stays in place. Attach a vacuum pump system to the opening by screwing it clockwise (Illustration 2). Unscrew the lid of the electronic valve (Illustration 3) and press the button to turn on the LED inside the valve (Illustration 4). Attach the rubber part of a pump to the valve and start pumping air out (Illustration 5). Red LED starts blinking, indicating ambient atmospheric pressure. The hand pump is fitted to the threaded valve body and the air is pumped out of a unit until the red LED changes to green LED and add couple more strokes to make sure the sufficient underpressure. The additional stroke or two ensures that the valve is not on the edge of the threshold. The pump is then removed, and the protective cap replaced to ensure airtightness. Observe the green LED blinking for 15 minutes to make sure there is no air leakage. Unscrew the lid of a valve to access the button and press it for a few seconds to release the pressure from inside and turn the valve LED off (Illustration 4). Remove the valve from the backplate and place the vacuum opening lid in its original place, make sure the O-ring is still there (Illustration 1). - safe to dive!